Simionic G1000 (MFD)7.6.1 - App Store

Check out this video:
https://www.youtube.com/watch?v=3xePnu3MsBQ

IMPORTANT NOTICE:
1. This app emulates G1000 MFD functionalities only. It does not include PFD functionalities. To obtain PFD functionalities, download the PFD app from AppStore which can co-operate with this app(MFD) via wifi connection.
Download address of PFD app: http://itunes.apple.com/us/app/id501990787?mt=8
2. This app is for practice only. The navigation database included in this app may be outdated and very possible to be different from what it is in real life.
3. Due to huge memory consumption, it's highly recommended that you install this app on an iPad which has at least 1G memory on board. Thus, install this app on iPad 1, iPad 2 or iPad mini is not recommended. Running this app on iPad Air or newer devices will get you a much better performance.

Disclaimer:
-Simionic and the seller are not affiliated with Garmin,
-The app is not provided, approved, endorsed, or otherwise supported by Garmin.

This is an app which simulates the Multi Function Display(MFD) of the Garmin G1000 used on Cessna 182T, 172S, 172R, 206H and Beechcraft Baron G58. It can also be configured to adapt piston, turboprop and jet engines. Most of the functionalities are implemented just as they are in the real life. It can be used by aviation enthusiasts as well as pilots to perform either an IFR training or just to familiarize the operations of G1000 MFD. This app is capable to connect to another app which simulates the G1000 PFD via wifi connection through which you can have a complete set of G1000 and make them work with FSX, Prepar3D , X-Plane or InfiniteFlight to get the best experience.

G1000 is a highly integrated system, it is very powerful and also very complicated. It is recommended that you have a real G1000 user guide from Garmin.

Details:
1. Global navigation database and topo data
2. Engine status simulation
3. Functional "Map Setup"
4. All pages including AUX pages are implemented
5. Terminal procedures are included
6. User waypoint creating/editing
7. User defined holding patterns
8. Flight plans storing/editing
9. Checklists for Cessna 182T, 172S, 172R and 206H are included
10. PFD connection via wifi

Version History 1. CDI in LPV mode is now more sensitive as it should, and the sensitivity increases gradually from FAF to runway threshold
2. When FAF leg of an RNAV approach is active, a 20NM magenta line will be drawn on the map from the FAF towards the back course of the approach heading
3. Approach names for circle-to-land approaches now are shown correctly, also fixes same approach names with different letter suffixes 7.6.1 Sep 8 -GPS based approaches are now shown in more detailed types such as LPV, LNAV, LP, LNAV/VNAV, LNAV+V, LP+V. Before there were only LPV and LNAV. 7.6.0 Jul 30 -Corrected a typo: "STRICK"-> "STRIKE" 7.5.1 07/07/2025 1. Magnetic variation has been re-modeled, this fixes the deviation issue when flying a flight plan and GPS approaches
2. Taking VORs' own magnetic variations into consideration instead of considering all the VORs are aligned to magnetic north
3. Added PSI as an option for torque display for a turboprop aircraft, the calculation is for Pilatus PC6 and PC12, may not apply to every turboprop planes 7.5.0 01/27/2025 -When selecting "vector" as the transition point or selecting "vector-to-final" on the PROC window it sets the active leg to the FAF waypoint
-All the IAFs are now listed as tradition points when selecting approach 7.4.3 02/07/2024 Fixes a bug causing a crash when selecting right course on the "search and rescue" window. 7.4.2 01/21/2024 1. Fixes a bug causing rivers or lakes are not drawn correctly
2. Other minor bug fixes 7.4.1 12/03/2023 1. Fixes wrong IAF and FAF
2. Search and rescue is now implemented 7.4.0 08/05/2023 Customized aircraft now shows on the aircraft list so users can select the customized aircraft without opening the customization window. 7.3.1 05/11/2023 Fixes an issue causing auto pairing with PFD not working under iPadOS 16
Fixes an issue causing the app not response to arrow keys when using a keyboard under iPadOS 16
Fixes an issue in entering ICAO code in settings window under iPadOS 16
Backlight on the hardware bezel now goes off when MFD is powered off 7.3.0 01/01/2023 1. Fixes a crash on reading non-ASCII characters from database
2. Corrects approach list on page nearest airports 7.2.5 05/14/2022 1. Fixes a bug regarding database update
2. Minor bug fixes 7.2.4 02/08/2022 1. Adds manually connection to PFD by entering PFD's IP address 7.2.3 01/21/2022 Fixes a crash when switching between airport info and approach pages
Fixes a bug causing altitude settings for waypoints disappear when storing the flight plan
Adds rudder trim indication for customized aircrafts
Adds flap notch marks on flaps indicator for customized aircrafts 7.2.2 12/21/2021 Fixes a crash on 12.9" iPads. 7.2.1 11/10/2021 1. Adds synchronization for G1000 failures from X-Plane (needs PFD v7.2.0 and G1000BridgeX v3.70)
2. Fixes missing colored arcs on customized engine gauges when the arcs are too short 7.2.0 11/06/2021 1. Hide home bar on iPads without a home button.
2. Fallback to use OpenGL so it'll run on older iPads 7.1.0 10/21/2021 Fixes the crash on 12.9" iPad Pro 7.0.1 06/22/2021 1. Utilizing Apple's Metal graphic engine
2. Adds keyboard shortcuts for all the buttons and knobs
3. Navigation database is now updatable. We will be publishing navdata monthly.
4. Fixes redundant airways listed when loading the airway and the inconsistency between PFD and MFD when loading an airway
5. Fixes some error while drawing the vertical profile
6. Fixes the crash on the last page of AUX pages when using a customized aircraft
7. Fuel capacity for customized aircrafts now can be displayed correctly on the soft keys in the engine system page
8. Other minor bug fixes 7.0.0 06/17/2021 1. Arc/bar colors of engine load percentage gauge can be edited now in aircraft customization
2. Oil pressure gauge settings accept decimal numbers now in aircraft customization
3. Fixed flaps/trim indicator position problem when vertical profile is visible
4. Navigation database updated to cycle 2010 6.0.1 09/13/2020 1. Added aircraft customization page. Engine gauges can be configured for piston, turboprop and jet aircrafts with customized parameters. Flaps and elevator trim positions can also be configured to show.
2. Updated navigation database to cycle 2009
3. COM&NAV volumes are synchronized and controllable with X-Plane(need bridge ver. 3.1 or higher)
4. Fixes a bug causing fuel flow too high and fuel consumption too fast
5. Improved map drawing to improve stability
6. Fixes a bug causing improper sequencing for the airport waypoint when loading an arrival
7. Improved full screen display for 11" iPad Pro, no system status bar on the top of the screen any more.
8. Fixes a bug causing FPL page staying on the screen
9. Other minor bug fixes 6.0.0 08/22/2020 Fixes another bug causing to the COM frequencies showing 10x 5.3.2 12/07/2019 Fixed missing radio frequencies in database 5.3.1 12/06/2019 1. Navdata updated to cycle 1912
2. Adds user defined holding pattern
3. Increases refresh rate for RPM and other engine parameters
4. Adds COM sync with PFD when switch to 121.5 by long pressing the COM switch button
5. Fixes a bug causing massive memory usage when the map is not north up
6. Fixes a map drawing bug in direct-to window
7. Fixes a zooming bug in "nearest" pages
8. Fixes a paging bug when returned to map page by long pressing the CLS button
9. Fixes a zooming bug caused by fast scrolling through flight plan page
10. Fixes a bug causing wrong map orientation when scrolling through pages
11. Supports dark mode for the settings window 5.3.0 11/29/2019 1. Minor bug fixes 5.2.0 06/05/2019